Bosch SB23 OC end plate with pressure transmission
Offered here are end plates for the Bosch SB23 OC system with pressure relay.
Instead of the original connection of P and N, the connections are routed externally here.
This makes it very easy to integrate external valves, such as a front loader control unit or an additional control block, onto the tractor.
All necessary connections for this are available on this valve.
The material thickness matches the original end plates, so usually no replacement of the end plate is required.
The end plate comes fully equipped with support rings, O-rings, and plugs for the test connection.
Viton seals are used, as in the original Bosch seal kits.
The delivery also includes three shims, which must be used as follows:
If shims were previously installed, the new end plate must also be installed with shims. If a control unit with embossings that were machined with a grinding stone was previously installed, shims must now be used. They must be slid onto the studs between the valve or end plate and ensure a defined gap between the valves.
Technical data:
- Material thickness: 28mm
- Max. pressure: 250 bar
- Nominal flow rate: 90 l/min
- Working connections: M22x1.5
Connection assignment:
P = Pump
N = Pressure relay (return to the system)
T = Pressureless return
