6-way electrically proportional valve block with joystick
Offered here are pre-assembled control blocks with toggle switch box and matching cable set.
The control block can be used to electrically control cranes, excavators, or similar equipment proportionally.
The basic hydraulic function is provided by an NG06 block with four double-acting sections for any cylinder functions (single- and double-acting). These sections are locked in the neutral position.
Due to the design, it is possible, with appropriate oil supply, to operate multiple functions simultaneously.
This offer includes the control with a joystick and corresponding base. The joystick also features two thumb rollers for the two additional auxiliary functions.
The joystick integrates two buttons that control the two supplied 6/2-way valves.
The switching valves can also be integrated into one of the four main functions.
This increases the number of controllable functions to six.
Included are a 3/8" 6/2-way valve for up to 50 l/min and a 1/2" 6/2-way valve for up to 80 l/min.
The central block provides the necessary valve technology for switching between LS and constant flow operation. The switching is done via a handwheel.
LS damping and LS relief are also integrated here.
The scope of delivery also includes a connection cable with a three-pin plug and the connection cable for the solenoids (labeled). Also included is a five-meter extension cable.
The control for the pilot valve (marked EVG in the cable set) is integrated into the joystick.
Technical data:
- adjustable max. LS pressure: 100-290 bar
- max. flow rate in constant flow mode: 100 l/min
- max. flow rate in LS mode: up to 250 l/min
- max. flow rate of NG06 sections: approx. 40 l/min
- max. flow rate of 1st NG10 section: approx. 100 l/min
- max. flow rate of 2nd NG10 section: approx. 70 l/min
- switching voltage: 12 VDC
- P/T connections: 3/4" BSP
- NG06 working ports: 3/8" BSP
- LS connection: 1/4" BSP
Other configurations are available on request!
