4-way electrically proportional valve block with joystick

Offered here are pre-assembled control blocks with toggle switch box and matching cable set.
The control block can be used to electrically control cranes, excavators, or similar equipment proportionally.

The basic hydraulic function is provided by an NG06 block with four double-acting sections for any cylinder functions (single- and double-acting). These sections are locked in the neutral position.

Due to the design, it is possible, with appropriate oil supply, to operate multiple functions simultaneously.

This offer includes the control with a joystick and corresponding base. The joystick also features two thumb rollers for the two additional auxiliary functions.

The central block provides the necessary valve technology for switching between LS and constant flow operation. The switching is done via a handwheel.
LS damping and LS relief are also integrated here.

The scope of delivery also includes a connection cable with a three-pin plug and the connection cable for the solenoids (labeled).Also included is an extension cable with a length of five meters.

The control for the pilot valve (marked EVG in the cable set) is integrated into the joystick.

Technical data:
- adjustable max. LS pressure: 100-290 bar
- max. flow rate in constant flow operation: 100 l/min
- max. flow rate in LS operation: up to 250 l/min
- max. flow rate per NG06 section: 40 l/min
- switching voltage: 12 VDC
- P/T connections: 3/4" BSP
- NG06 working connections: 3/8" BSP
- LS connection: 1/4" BSP

Other configurations are available on request!