5-fold control block with control 1x NG10 4xNG06, LS capable

Offered here are pre-assembled control blocks with toggle switch box and matching cable set.
The control block can be used, for example, to retrofit an electrohydraulic control on hook lifts, trucks, or various other devices.

A large NG10 block with four double-acting NG10 functions for cylinder functions with very high flow rates.

Depending on the chosen version, a large flow control valve (constant flow), a pilot valve (load-sensing system), or a pressure compensator with control (switchable version) is integrated.

This offer includes the control in the form of a toggle switch box.
The four toggle switches in the proven OIL-Box are momentary switches.
The scope of delivery also includes a connection cable with a three-pin plug and the connection cable for the solenoids (labeled).
Also included is an extension cable five meters long, as well as the connection cable with a three-pin plug.

The control for the pilot valve (marked EVG in the cable set) is integrated into the control box.

Depending on the chosen version, pressure relief valves are integrated.

Technical data:
- adjustable max. LS pressure: 100-290 bar (for switchable version)
- adjustable max. main pressure: 75-250 bar (for constant flow version)
- max. flow rate in constant flow operation: up to 200 l/min (switchable version: 120 l/min)
- max. flow rate in LS operation: up to 250 l/min
- max. flow rate per NG10 section: 120 l/min
- switching voltage: 12 VDC or 24 VDC
- P/T ports: 3/4" BSP
- NG10 working ports: 1/2" BSP
- LS port: 1/4" BSP or 10L

Other configurations are available on request!