3-way electrically proportional flow control valve, residual current loadable, including control

We sell ready-assembled electrically proportional flow controllers with control here.
The system can be used to regulate the hydraulic flow rate remotely. This allows, for example, adjusting the speed of hydraulic motors or the flow rate in hydraulic valves.
One application is the regulation of the scraper floor speed in forage wagons or manure spreaders.
Additionally, a direct setting of the ramp function enables adjustment of the soft start and deceleration of the flow rate.
A maximum value can also be set.

The flow controller is a compensated 3-way flow control valve, so the excess flow is pressure-resistant and can be used for other applications.

When the main switch is off, the entire flow is directed to the excess outlet.
The controller next to it sets the prioritized flow rate.

The offer also includes a 2m supply cable with a three-pin plug and a 5m cable between the control box and the flow control valve.

The system is fully pre-assembled and ready to use immediately.

Technical data:

• max. input flow rate: up to 160 l/min (depending on selection)
  
• max. prioritized flow rate: up to 90 l/min (depending on selection)
• max. pressure: 210 bar (available up to 315 bar on request)
• Rated voltage: optionally 12 or 24 VDC
• Protection class: IP65 (control box: IP67)
• Hysteresis: 8%
• Oil filter rating: 18/16/13 according to ISO4406
• Oil temperature: -20°C to 80°C
• Connection thread:
  • 20 l/min: 3/8" BSP
  • 50 l/min / 90 l/min: 1/2" BSP
  • 160 l/min: 1" BSP

Connection assignment:

1= Inlet
2= Excess flow
3= prioritized (adjustable) flow